Precision Branding on
Every Silicone Surface
From silk screen and pad printing to in-mold decoration and laser marking -- YMS delivers factory-grade logo application and surface finishing across solid and liquid silicone products. Every process is calibrated for brand consistency, durability, and global compliance.
Silk Screen &
Pad Printing
The two most versatile printing methods for silicone surfaces. Both deliver vibrant color and precise detail -- the right choice depends on your product's geometry and finish requirements.
Silk Screen Printing
Ink is pressed through a fine mesh stencil directly onto the silicone surface. Ideal for crisp, solid-color logos on flat or lightly curved substrates such as placemats, baking mats, and silicone sheets.
- High color saturation & Pantone matching
- Thick, durable ink layer with silicone-based inks
- Food-grade compliant (FDA/LFGB)
Pad Printing (Tampo)
A silicone pad transfers ink from an etched plate onto irregular, curved, or textured surfaces. Perfect for folding cups, spatula handles, bottle sleeves, and small 3D components.
- Prints on concave, convex, and curved shapes
- Fine details and small text down to 0.2mm
- Multi-color registration up to 4 colors
Embossed Logos
& In-Mold Decoration
When your brand demands a tactile, permanent identity, we integrate the logo directly into the mold tooling. The result: a seamless, inkless branding that never wears off.
Embossed Logo (Raised)
The logo protrudes from the product surface, created by engraving a recessed cavity into the mold tool. Delivers premium tactile feedback without any paint or ink.
Debossed Logo (Recessed)
The logo is pressed inward below the surface. Offers a subtle, minimalist aesthetic favored by premium lifestyle brands -- can be left clean or in-filled with contrasting silicone color.
In-Mold Decoration (IMD)
A pre-printed film or secondary-color silicone is placed inside the mold cavity before injection -- bonded permanently during curing. Enables multi-color logos, gradients, and complex graphics that are fused with the product itself.
- Zero post-processing -- graphics are molded in
- Dual-color silicone co-molding supported
- Ideal for high-volume branded consumer goods
Laser Marking &
Specialty Finishing
Beyond printing and molding, we offer a complete toolbox of secondary processing techniques to elevate texture, performance, and visual identity.
Laser Engraving
Permanent, ink-free mark produced by precision laser. Ideal for serial numbers, barcodes, and ultra-fine logos.
UV Coating
Enhances surface hardness, scratch resistance, and gloss. Enables matte-to-glossy conversion on silicone products.
Spray Painting
Full-surface or partial color application with soft-touch, rubberized, or metallic finishes.
Adhesive Backing
3M VHB or custom backing applied for mats, pads, and accessories requiring secure attachment.
Additional Secondary Processing
Die cutting, dripping (epoxy doming), hot stamping, color-matched silicone infill, and custom texture molding -- all available as part of our one-stop manufacturing service.
Choosing the Right Process
for Your Product
Different product geometries demand different finishing approaches. Here's how we match process to structure for optimal results.
Flat Products -- Placemats, Baking Mats, Coasters
Large flat area, minimal curvature
Flat Products -- Placemats, Baking Mats, Coasters
Large flat area, minimal curvature
Curved / 3D Products -- Folding Cups, Spatula Handles
Irregular surfaces, cylindrical or ergonomic forms
Curved / 3D Products -- Folding Cups, Spatula Handles
Irregular surfaces, cylindrical or ergonomic forms
Food-Contact Products -- Molds, Utensils, Baby Items
Direct food/skin contact, FDA/LFGB compliance critical
Food-Contact Products -- Molds, Utensils, Baby Items
Direct food/skin contact, FDA/LFGB compliance critical
Multi-Color / Graphic-Heavy Products
Full-color logos, gradients, decorative artwork
Multi-Color / Graphic-Heavy Products
Full-color logos, gradients, decorative artwork
Process Comparison --
Color, Durability, Cost & MOQ
A quick reference to help you balance brand quality, production cost, and order volume for your project.
| Process | Color Range | Durability | Unit Cost | Typical MOQ |
|---|---|---|---|---|
| Silk Screen | Pantone, up to 6 colors | High | Low | 1,000 pcs |
| Pad Printing | Pantone, up to 4 colors | High | Low-Medium | 1,000 pcs |
| Embossed / Debossed | Product color only | Lifetime | Mold-cost + Low | 2,000 pcs |
| In-Mold Decoration | Full-color, gradients | Lifetime | Medium-High | 5,000 pcs |
| Laser Engraving | Monotone (contrast) | Permanent | Low | 500 pcs |
| UV Coating / Spray | Full spectrum | High | Medium | 2,000 pcs |
* MOQ values are typical references and may vary based on product complexity and total order value. Contact us for a project-specific quote.
Sample Approval
& Mass-Production QC
Brand consistency depends on uncompromising process control. From pre-production samples to final inspection, every logo-finished part passes our ISO 9001 quality system.
Full visual, dimensional, adhesion, and durability testing against approved golden samples.
-
01
Pre-Production Sample
We produce a logo-finished sample using the final tooling and process. You review color accuracy, finish quality, and brand placement before signing off.
-
02
Golden Sample Lock
Approved samples are retained as the reference standard for the entire production run. Every subsequent batch is measured against them.
-
03
In-Line Inspection
Dedicated QC operators (minimum 5 years experience) perform real-time checks on every production line -- print alignment, color consistency, surface defects.
-
04
Adhesion & Durability Testing
Printed logos undergo tape-pull adhesion tests, alcohol wipe tests (RCA abrasion), and high-temp cycling to verify long-term bond integrity.
-
05
Final AQL Inspection & Packing
AQL 2.5 sampling before shipment -- appearance, dimensions, function, and packaging all verified. Full inspection report provided with every shipment.
Submit Your Logo --
Get Our Expert Recommendation
Upload your artwork and describe your product. Our engineering team will recommend the optimal finishing process, estimate tooling needs, and provide a transparent quote within 24 hours.
- Free process & feasibility review
- Pantone color matching advice
- NDA available on request