Engineered for Every
Touch & Feel
From ultra-soft 10A to industrial-grade 80A, we tailor silicone hardness (Shore A) to match the exact function, feel, and performance your product demands. One formulation, infinite possibilities.
Hardness Range &
Tactile Reference
Shore A measures how resistant silicone is to indentation. The lower the number, the softer and more flexible -- the higher, the firmer and more structural. Here's what each range feels like.
Feels like a stress ball or human skin. Highly stretchable, sticky-touch, maximum cushioning.
Pleasant soft-touch feel, like a pencil eraser. Flexible and resilient without feeling flimsy.
The industry standard. Firm but flexible -- like a shoe sole or rubber band. Easy demolding, good shape retention.
Firm, structural, minimal give. Comparable to tire tread or hard rubber. High abrasion resistance.
How Hardness
Shapes Performance
Hardness isn't just about feel -- it directly determines how your product supports load, rebounds under stress, and releases from the mold. Selecting the right value is critical to product success.
A 10A difference can change tear strength by up to 30% and compression set by over 15%. Even small shifts matter.
Support & Load Bearing
Higher Shore A values (60A+) resist deformation under weight -- ideal for structural parts. Lower values conform and cushion, perfect for ergonomic contact surfaces.
Elasticity & Rebound
Softer silicones stretch further and recover faster, delivering superior rebound. Firmer grades sacrifice flexibility for dimensional stability and shape memory.
Demolding & Processability
Very soft silicones (under 30A) require careful mold design to avoid tearing on release. Standard 50-60A grades offer the best balance of yield rate and detail reproduction.
Hardness Selection
By Product Type
Years of OEM experience across kitchen and lifestyle categories. Here are the hardness recommendations we've validated for common product lines.
Baking Molds
50AFirm enough to hold intricate shapes, flexible enough for easy demolding of cakes and chocolates.
Folding Cups
40-60ADual-hardness combination: soft walls for collapsibility, firmer base for stability.
Spatulas / Scrapers
60-70AEnough rigidity to scrape and mix effectively, while remaining non-scratch and flexible at the edges.
Placemats / Trivets
55-65AFlat lay stability and anti-slip grip, with just enough softness to protect surfaces.
Oven Mitts / Grips
30-45ASoft, pliable, and comfortable -- contours naturally to the hand while providing thermal protection.
Seals / Gaskets
70-80AHigh compression resistance and precise dimensional accuracy for leak-tight industrial applications.
Single Hardness vs.
Combined Hardness Design
Some products excel with one uniform hardness; others require two or more hardness zones in a single piece. We engineer both -- through co-molding, bonding, or multi-shot injection.
Single Hardness
One uniform Shore A value across the entire part. Fastest to produce, lowest tooling cost, best for parts with consistent function throughout.
A silicone trivet in uniform 60A -- consistent heat resistance and grip across the entire surface.
Combined / Dual Hardness
Two or more hardness zones in a single product -- via over-molding, co-injection, or bonding. Delivers advanced functionality in one unified part.
A folding travel cup: 40A soft collapsible walls bonded to a 65A rigid base ring for stability.
Hardness Sampling,
Measurement & Confirmation
Before mass production, we deliver physical hardness samples for you to touch, test, and approve -- removing all guesswork from your decision.
Hardness Brief
You share product use case, target feel, or reference samples. We propose candidate hardness values.
Sample Chip Delivery
We send a hardness sample card with chips from 10A to 80A, labeled and ready for tactile comparison.
Durometer Testing
Each sample is verified using calibrated Shore A durometers per ASTM D2240 -- recorded in a QC report.
Final Confirmation
You approve the selected hardness in writing. It's locked into the production SOP for every unit produced.
Batch Hardness
Consistency Control
Approving a hardness is only the beginning. Our ISO 9001 process ensures every batch -- every unit -- matches the approved standard within ±2 Shore A.
Raw Material Verification
Every incoming silicone compound batch is tested for hardness, viscosity, and purity before entering the production line.
Cure Time & Temperature Lock
Cure parameters are codified per SKU. Automated controls prevent drift that would shift final hardness.
In-Line Hardness Sampling
Durometer checks every 30 minutes during production. Any deviation triggers immediate line stoppage and recalibration.
Batch QC Report
Every shipment includes a full batch report: hardness readings, dimensional data, and visual inspection results.
Request a Hardness
Sample Card
Not sure which Shore A value fits your product? Tell us about your project and we'll ship a physical sample card or provide expert selection advice -- free of charge.