Cost Optimization Service

Silicone Product
Cost Optimization

Lower unit cost without compromising brand quality. Our engineering team reviews your BOM, mold design, and process flow to uncover 10-30% savings -- backed by 15 years of OEM/ODM manufacturing data.

10-30%
Avg. Cost Reduction
±0.1mm
Precision Retained
15 Yrs
DFM Experience
01 -- Material Analysis

Material &
Usage Review

Raw material typically accounts for 40-60% of a silicone product's cost. We analyze your current specification against performance requirements to identify over-engineering and material waste.

Silicone material analysis in laboratory

Grade Selection Audit

Compare solid vs. liquid silicone (HTV vs. LSR), food-grade vs. industrial-grade, and hardness (Shore A) alignment with actual end-use. Avoid paying premium for unused performance.

Weight & Volume Optimization

Reduce wall thickness where structurally safe, eliminate solid cores through geometry change, and recalculate shot weight -- often yielding 8-15% raw material savings.

Color & Pigment Cost

Pantone-matched custom pigments can carry 3-5× markup. We propose standard-palette equivalents or masterbatch alternatives that remain visually faithful.

Certification Scope

FDA, LFGB, BPA-free remain non-negotiable for food contact. We confirm your product only pays for certifications it genuinely requires.

02 -- Structure & Geometry

Structure, Dimensions
& Part Count

Simpler geometry means faster cycles, fewer defects, and lower assembly cost. Our DFM engineers rebuild your part file to eliminate complexity that doesn't serve the end user.

Wall Thickness Logic

Uniform wall thickness (1.5-3mm range) prevents warpage, reduces cycle time, and consumes less material. We flag over-thick zones and recommend coring.

Typical saving 5-12%

Tolerance Review

Not every dimension needs ±0.1mm. Loosening non-critical tolerances to ±0.3mm reduces scrap rate and allows faster tooling, without affecting fit or function.

Scrap reduction up to 40%

Part Consolidation

A multi-component assembly often becomes a single over-molded part. Fewer parts = fewer molds, less assembly labor, lower QC overhead.

Assembly cost -20-50%

Feature Rationalization

Deep undercuts, sharp ribs, and complex textures drive mold cost and cycle time. We identify features that add manufacturing cost without perceived product value.

Tooling cost -15-25%
Multi-cavity silicone injection mold
64
Injection Machines
32 solid + 32 liquid
Right-sized tonnage selection prevents overpaying for underutilized capacity.
03 -- Tooling & Efficiency

Mold Cavity &
Production Efficiency

The right cavity count can transform your per-piece economics. We model your annual volume against mold investment to find the sweet spot -- not too few, not too many.

01

Cavity Count Modeling

Analyze annual volume, cycle time, and press capacity to recommend 1-, 2-, 4-, 8-, or 16-cavity tooling for optimal payback.

02

Cycle Time Reduction

Cooling channel redesign, gate relocation, and curing-system tuning can shave 10-20% off each shot.

03

Mold Lifecycle Planning

P20 vs. H13 steel, hardened inserts, and interchangeable blocks -- balanced for your projected production years.

04

Automation Fit

Where volume justifies, LSR cold-runner systems and robotic demolding eliminate waste and labor overhead.

04 -- Downstream Cost

Process, Assembly
& Packaging

Hidden cost often lives downstream of molding -- in secondary processing, hand-labor steps, and over-engineered packaging. We treat the full chain as one optimization target.

Secondary Process

Silkscreen, pad printing, UV coating, back-adhesive application -- we evaluate whether each step is essential or decorative.

  • Printing vs. in-mold labeling
  • Coating alternatives
  • Trimming automation

Assembly Flow

Fixtures, jigs, and operator sequencing reviewed for labor minutes per unit -- the single most variable cost in low-volume runs.

  • Snap-fit vs. adhesive
  • Jig standardization
  • Line-balance analysis

Packaging & Logistics

Carton dimensioning, nesting efficiency, and freight-class optimization -- small changes that compound across a container.

  • Right-sized inner cartons
  • Nesting & stacking
  • Recyclable alternatives
05 -- Non-Negotiables

Target Quality &
What We Won't Cut

Cost reduction only matters if your product still delivers for the end customer. Before proposing changes, we document the quality floor -- the attributes that must be preserved.

"We never recommend changes that would compromise FDA/LFGB food-safety status, structural reliability, or your brand's perceived quality. Savings come from engineering -- never from shortcuts."

Food Safety

FDA, LFGB, BPA-free status -- fully preserved for any food-contact SKU.

Tensile Strength

Verified by batch tensile testing. Material toughness retained at +45% baseline.

Thermal Resistance

High/low temperature performance validated per original spec (-40°C to +230°C typical).

Tactile Feel

Hand-feel, flexibility, and perceived premium quality -- benchmarked to approved sample.

Appearance

No visible flashing, color drift, or surface defects. 100% visual inspection standard.

Brand Standards

Logo clarity, packaging presentation, and all customer-facing identifiers remain intact.

06 -- Proposal & Validation

Proposal, Projected Impact
& Validation Path

Every recommendation ships with projected savings, implementation effort, and a validation protocol -- so you can approve changes with confidence.

01

Written Proposal

Line-by-line BOM comparison, revised 3D files (where applicable), and new mold concept -- delivered as one document.

02

Impact Modeling

Projected FOB savings per unit, tooling ROI period, and sensitivity analysis at different annual volumes.

03

Prototype & Testing

T1 samples produced, then validated with tensile, tear, aging, impact, and dimensional CMM reports.

04

Pilot Run & Signoff

Low-volume pilot order produced under new spec, with full QC report and side-by-side comparison vs. baseline.

7-10
Days to Proposal
T1-T3
Sample Rounds
ISO 9001
QC Framework
100%
Final Inspection
Free BOM Assessment

Submit your BOM or
product file today

Share your current specification, 3D files, or sample photos. We'll return a written cost-optimization assessment within 7-10 business days. No obligation.

edwin@gd-yums.com
+86 13418983587 (WhatsApp)
NDA signed on request

Accepted: PDF, DOC, XLS, ZIP, STEP, IGS, JPG, PNG -- max 10MB

By submitting, you agree to our confidential review process. We respond within 7-10 business days.